The MEM-4660 acts as a gateway between an
Ethernet network and an ASI environment.
The MEM-4660 is designed to operate as a pair with one unit at each end of the link. The unit can be set up to act as a transmitter or receiver for uni-directional operation, or as a transceiver (transmitter and receiver) for bi-directional operation.
It is also possible to use multiple units at multiple locations to receive from a single transmitting unit.
All parameters are set and read via a Simple Network Management Protocol (SNMP) system. As such the MEM-4660 must be operated, or at least set up, in one of IRT's frames fitted with SNMP capability.
|
Forward Error Correction (FEC) can be enabled or disabled on the transmitter with a 4/5 Length/Depth setting.
The Gigabit Ethernet port has automatic MDI/MDI-X detection. This detects whether the Ethernet interconnect cable is a straight through or cross over type and automatically switches itself to accommodate.
The MEM-4660 is designed to fit IRT's current Eurocard 1RU and 3RU frames fitted with SNMP control.
|
